manualshive.com logo in svg

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 11 / 200

Поделиться
Скачать
DURKOPP ADLER 911-211 Скачать руководство пользователя страница 11

Safety

Service Instructions 911-211 - 02.0 - 10/2016

10

2

Safety

This chapter contains basic information for your safety. Read the instruc-
tions carefully before setting up or operating the machine. Make sure to 
follow the information included in the safety instructions. Failure to do so 
can result in serious injury and property damage.

2.1

Basic safety instructions

The machine may only be used as described in these instructions.

These instructions must be available at the machine's location at all times.

Work on live components and equipment is prohibited. Exceptions are de-
fined in the DIN VDE 0105.

For the following work, switch off the machine at the main switch or dis-
connect the power plug:

• Replacing the needle or other sewing tools

• Leaving the workstation

• Performing maintenance work and repairs

• Threading

Missing or faulty parts could impair safety and damage the machine. 
Only use original parts from the manufacturer.

Transport

Use a lifting carriage or forklift to transport the machine. Raise the ma-
chine max. 20 mm and secure it to prevent it from slipping off.

Setup

The connecting cable must have a power plug approved in the relevant 
country. The power plug may only be assembled to the power cable by 
qualified specialists.

Obligations 

of the operator

Follow the country-specific safety and accident prevention regulations and 
the legal regulations concerning industrial safety and the protection of the 
environment.

All the warnings and safety signs on the machine must always be in legible 
condition. Do not remove! 

 

Missing or damaged warnings and safety signs must be replaced 
immediately. 

Requirements 

to be met by 

the personnel

Only qualified specialists may:

• set up the machine

• perform maintenance work and repairs

• perform work on electrical equipment

Only authorized persons may work on the machine and must first have un-
derstood these instructions.

Содержание 911-211









































































































































































































Отзывы:

Нет отзывов