DURKOPP ADLER 911-211 Скачать руководство пользователя страница 134

Страница: 134 / 200

Programming

133

Service Instructions 911-211 - 02.0 - 10/2016

Setting the brightness

To set the brightness:

In the menu item

Extras

Service

Einstellungen

(Settings)

tap the

Bedienfeld-Einstellungen

(Control panel settings)

option.

In the following window tap the

Kontrast (Contrast)

Helligkeit (Brightness)

option.



A window with slider controls is displayed.

Pull the corresponding slider control up or down to change the value.



The changes are immediately visible on the display.

Testing the touchscreen

You can use the

Extras

Service

Einstellungen

(Settings)

menu item to check that the touchscreen is functioning

correctly over all areas of the screen.

To test the touchscreen:

In the menu item

Extras

Service

Einstellungen

(Settings)

tap the

Bedienfeld-Einstellungen

(Control panel settings)

option.

In the following window tap the

Touch

Test

option.



An empty window is opened.

Use your finger to tap various different points or draw lines.



When the touchscreen is functioning correctly all touched points of
the screen are marked.

Testing the functions of the machine

You can use the

Extras

Service

Multitest

menu item to

check the inputs and outputs, test the sewing motor and set the stroke
position.

Fig. 106: Testing the functions of the machine

Содержание 911-211









































































































































































































Результаты поиска

Содержание 911-211

Отзывы:

DURKOPP ADLER 911-211, Инструкция по эксплуатации, Страница: 134 / 200

Результаты поиска

Содержание 911-211

Отзывы: