Docomo mova SH506iC, Руководство пользователя, Страница: 505 / 588

Using the Switch-equipped Earphone (Optional)
503
Us
ing O
the
r Func
tion
s
Using the switch to receive calls
Note If the phone number registered for the memory number has been set as secret data, enable
Secret mode before using the switch to make the call.
If the switch-equipped earphone is left connected and the mova is placed in a briefcase or a
bag, the switch may inadvertently be pressed, causing the phone to dial out. Remove the
switch-equipped earphone when not in use.
When the Security setting (
n
P.202) for “Phonebook lock” is set to “
E
” (Set), calls cannot
be placed.
When Keypad lock is enabled, you can use the switch to receive a call, but you cannot make
a call (
n
P.207).
If you connect and then immediately disconnect an earphone without a switch from the
earphone/microphone socket, the phone may automatically dial out. Please be careful.
When a switch-equipped earphone is connected, the keypad sound, open sound, rotation
sound, and close sound can be heard only through the earphone regardless of Ring output
settings (
n
P.114).
Sounds from the earphone are heard at the volume level set when adjusting the earpiece
volume (
n
P.56).
Do not use excessive force on the rubber cover of the earphone/microphone socket. This may
cause damage.
1
Connect the switch-equipped earphone.
Insert the switch-equipped earphone connector plug into the earphone/microphone socket.
2
When you receive a call, press the switch on the switch-equipped
earphone for at least 2 seconds.
The call is connected. (The call can also be connected by pressing
s
on the mova.)
Talk with the other party.
3
After the call is finished, press the switch for at least 2 seconds.
The call is ended. (The call can also be ended by pressing
H
on the mova.)
Note During 3-way calls, you can press the switch to switch between the parties in the call,
instead of pressing
s
on the mova.
If you connect the switch-equipped earphone after ringing starts, the call may be connected
at the moment the switch-equipped earphone is connected even though the switch has not
been pressed. Remove the switch-equipped earphone when not in use.
Do not press and let go of the switch continuously. Calls may automatically be made or
received.
Do not wind the switch-equipped earphone cord around the mova. This may cause the
antenna to stop functioning properly.
Bringing the switch-equipped earphone cord close to the antenna may generate noise.
Please be careful.
Insert the plug completely. If not plugged in completely, sound may be inaudible. If plug is not
completely inserted, a beep sounds but this is not a malfunction.
If the power is turned on while the switch-equipped earphone is connected, a click may be
heard. This is not a malfunction.
Do not use excessive force on the rubber cover of the earphone/microphone socket. This
may cause damage.
e̲n500.book Page 503 Tuesday, August 9, 2005 1:15 PM