Docomo mova SH506iC, Руководство пользователя

Страница: 429 / 588

Call Forwarding Service (Free)
427
Us
ing Ne
tw
o
rk
Se
rv
ic
e
s
When you manually forward a call while the phone is ringing or during another call, you
can select whether or not to play the guidance.
The default setting is “ON” (Play).
You can start and stop the service or register a forwarding destination while checking the
operation on the mova display.
Starting or stopping the Call Forwarding Service
Registering a forwarding destination
Kt432L
Enabling or Disabling “Set Fwd w/Msg.” When Forwarding a Call
Kt433L
1
In the stand-by, press
t
and select , and then press
t433
.
The screen to set forward with message is displayed.
2
Press
1
(ON).
To not play a message
Press
2
.
Note We recommend that you notify the caller, when forwarding, using “Set Fwd w/Msg”.
When “Set Fwd w/Msg” is set to “OFF”, the caller only hears a ring tone if the forwarding
destination is busy, out of the service area, the phone is turned off or is set to Drive mode.
This function is only available when forwarding calls manually (
t*
).
This cannot be used when dialing or during a call.
If
1421s
is used to start call forwarding, “Set Fwd w/Msg” is set to “ON”.
When the call is forwarded, the caller hears the guidance “
このお電話を転送いたしますの
で、そのままお待ちください
” (Call will be forwarded. Please wait.).
Using the Call Forwarding Service While Checking the mova Display
Kt431L
1
In the stand-by, press
t
and select , press
t431
,
select “Start” or “Stop”, and then press
t
.
Forwarding is started or stopped.
2
Follow the guidance to set.
1
In the stand-by, press
t
and select , press
t432
,
and then press
t
.
Forwarding destination registration is started.
2
Follow the guidance to set.
Note If you register a forwarding destination from an ordinary phone or payphone (refer to the
“Network Services General User’s Manual”), Call Forwarding Service is automatically set to
“Start” when you register the forwarding destination.
e̲n500.book Page 427 Tuesday, August 9, 2005 1:15 PM