Docomo mova SH506iC, Руководство пользователя

Страница: 439 / 588

About Infrared (Ir) Exchange
437
Usin
g Infra
red Ex
cha
nge
Please note that when you receive all items, all data on the device receiving the information
will be overwritten.
Up to 500KB of images can be sent/received with Ir exchange.
Infrared exchange is performed in Infrared exchange mode. You can perform the
following operations in Infrared exchange mode.
Notes on using the Infrared exchange function
Place the sending and receiving movas on a table or other stable surface within 20cm of
each other. Align so that the infrared (Ir) ports of the movas are pointing at each other.
When data is received, “Save?” is displayed on the receiver side. Keep the Infrared (Ir) ports
on the mova terminals aligned until “Yes” or “No” is selected, and
t
(OK) is pressed.
Do not move the two movas until transmission is complete, and keep the infrared ports aligned.
If the exchange is performed in places exposed to direct sunlight, fluorescent lighting, or
other infrared devices, the data exchange may not be performed correctly.
If the infrared port is dirty, it becomes difficult to perform the exchange. Clean with a soft
cloth, taking care not to damage the port.
Still pictures in
My picture ○ × Saved in order of available memory spaces, starting at the top.
Owner information ○ × The information is saved as a Phonebook entry.
Infrared Exchange Mode
Send one item Sends data selected from a Phonebook or mail screen etc., 1 item at a time.
The data is added to the appropriate function on the receiver side.
Receive one item In the receive Ir data screen, 1 item of data at a time is received from the mova
sending the data. The received data is automatically identified and is added to
the appropriate mova function.
Send all data All data for each function is sent, from the Phonebook or mail screen, etc.
Receive all data In the receive Ir data screen, all data is received for a function specified by the
mova sending the data.
Note i-mode is automatically ended if infrared exchange is started during an i-mode session.
If you interrupt the Infrared exchange or if it could not be completed correctly, the following
messages are displayed.
“Connection interrupted. Retry?”, “No response. Retry?”, “Authentication failed. Retry?”
In these cases, select “Yes”, press
t
, and then try again.
If the exchange is not completed successfully, move the movas closer together, and try
again.
Images sent by Infrared exchange may lose picture quality or change in data size.
When sending a still picture with a title exceeding 10 full-pitch (19 half-pitch) characters, only
the first 9 full-pitch (18 half-pitch) characters are received.
Function One All Notes
30
゜
or less
Within 20cm
e̲n500.book Page 437 Tuesday, August 9, 2005 1:15 PM