Docomo mova SH506iC, Руководство пользователя, Страница: 442 / 588

440
Usin
g Infra
red Ex
cha
nge
You can use the Infrared exchange function to send or receive all data for each function on
the mova.
Refer to P.436 for details on the types of data you can send and receive.
To send or receive all data items, you need to enter your “terminal security code” and
“password”.
For the “terminal security code”, enter your current 4-digit mova terminal security code.
The “password” is exclusively for Ir exchange. Before starting to send or receive data,
decide on a 4-digit password, and enter the same number on both the receiver and
sender mova units. You can change this password each time you perform Ir exchange.
Perform this operation from a list screen of the data you wish to send.
This example describes how to send Phonebook data.
Send/Receive All
Sending and Receiving All Data
Sending All Data
1
Set the receiver mova to stand-by for receiving all data (
n
P.441).
2
Press
C5
(Send Ir data) in the phonebook list screen.
The submenu numbers differ depending upon the type of data being sent and the screen
from which it is being sent.
3
Press
2
(Send all).
The screen to enter your terminal security code is displayed.
4
Enter your terminal security code (4 digits).
Each entered digit is displayed as “
b
”.
5
Enter the password (4 digits).
If this matches the password entered by the receiver, data sending starts and “
J
” is
displayed.
When all the data has been sent, “Exchange completed” is displayed, and the mova returns
to the screen of step 2.
Note You cannot send Phonebook data if the Phonebook lock is set.
When sending all schedules, perform “Show all scheds” before sending Ir data.
On the receiving mova, the bookmark list for Send all is displayed in the order they were
used last.
e̲n500.book Page 440 Tuesday, August 9, 2005 1:15 PM