Docomo mova SH506iC Скачать руководство пользователя страница 289

Страница: 289 / 588

Setting i-mode

287

View

ing

Inform

atio

n Usin

g i-m

ode

You can set the mova to not display still pictures included in sites and webpages,
messages, or screen memos.

The default setting is “ON” (Display).

Set fonts in sites, web pages, and screen memos to “Large font”, “Default”, or “Small font”.

The default setting is “Default”.

Setting to Not Display Images <Image Display>

Ki931L

In the stand-by, press

and select

, press

t931

(Set image display).

The set image screen is displayed.

Press

(OFF: Deactivate image display).

To display

Press

Note

If image display settings are set to “OFF”, “

” appears in place of the still picture.

In this case, if the displayed screen is saved as a screen memo, still pictures are not saved
(

P.272).

If image display settings are “OFF”, Flash movies and images received with i-shot are not
displayed.

Enlarging the Font Size for Sites, Web Pages, and Screen
Memos <Font Size>

Ki932L

In the stand-by, press

and select

, press

t932

(Font size).

Select font size, and then press

Note

Some sites may not display properly when “Font size” is changed.

When set to Large

font

When set to

Default

When set to Small

font

e̲n500.book Page 287 Tuesday, August 9, 2005 1:15 PM

Содержание mova SH506iC













































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание mova SH506iC

Отзывы:

Docomo mova SH506iC, Руководство пользователя, Страница: 289 / 588

Результаты поиска

Содержание mova SH506iC

Отзывы: