Docomo mova SH506iC, Руководство пользователя

Страница: 180 / 588

178
Editing Movies
Us
ing th
e
Ca
m
e
ra
Cut a part of a movie recorded with the mova by marking the starting point and ending
point and save as a new movie.
In this case, the original movie will not be changed and remains the same.
Segments that are 2 seconds or shorter cannot be cut.
You can erase the first or last half and save the rest as a new movie.
In this case, the original movie will not be changed and remains the same.
When erasing, the remaining part cannot be shorter than 2 seconds.
Setting the Starting Point and Ending Point, and Cut <Movie Cutter>
1
During playback (
n
Steps 1 to 3 on P.175) of a movie, press
t
at the point where you wish to start cutting.
The movie is paused. Press
v
while paused to forward/reverse.
Adjust the image.
2
Press
CC2
(Movie cut (strt)).
This point will be the starting point.
3
Press
t
.
Playback starts and the Play key for the segment that is about to be cut changes color.
4
Press
t
at the desired ending point.
The movie is paused. Press
v
while paused to forward/reverse by frame.
Adjust the image.
5
Press
CC3
(Movie cut (end)).
This point will be the ending point.
6
Select “Yes”, and then press
t
.
The selected range is saved as a new movie.
To not save
Select “No”, and then press
t
.
Erase the First Half or Last Half <Erase Prev Part/Erase All After>
1
During playback of a movie (
n
Steps 1 to 3 on P.175), press
t
at the point where you wish to erase as the starting point.
The movie is paused. Press
v
while paused to forward/reverse by frame.
Adjust the image.
2
Press
CC4
(Erase prev part).
Segments up to this point will be erased.
To erase the last half
Press
CC5
.
3
Select “Yes”, and then press
t
.
The remaining part is saved as a new movie.
To not save
Select “No”, and then press
t
.
e̲n500.book Page 178 Tuesday, August 9, 2005 1:15 PM