Docomo mova SH506iC, Руководство пользователя

Страница: 218 / 588

Us
ing
T
ime
r and Sche
dule
Func
tion
s
216
Sounding an Alarm After a Specified Time
If the mova is closed and in the aforementioned status, “Auto power OFF
R
” is displayed in
the sub display. Press
;
to scroll the message.
If you are on another call, the confirmation screen from step 3 on the previous page is
displayed when the mova returns to the stand-by display after the call is ended.
If you are updating software (
n
P.564), the confirmation screen from step 3 on the
previous page is displayed when the mova returns to the stand-by display after the update is
finished.
When a specified amount of time has passed, an alarm will sound.
The alarm sounds for approximately 3 seconds (For “
標準音
”). Press a key to stop the alarm.
You can set the length of time between 1 minute and 99 minutes.
When the Vibrator (
n
P.98) is set, the Vibrator also operates when the alarm activates.
Note When Auto power OFF and the alarm are set for the same time (alarm set using Alarm or
Schedule), the power is turned off by the Auto power OFF function and the alarm does not
sound. (Select “No”, and then press
t
in the confirmation displayed on the previous page to
return to the stand-by display and sound the alarm.) If power is turned on at the set time, the
alarm sounds.
Also, the mova does not turn off while an i-
α
ppli is operating, even when the time set for this
function comes. The Auto power OFF confirmation screen is displayed when the mova
returns to the stand-by display or i-
α
ppli is ended.
The power does not turn off while your mova is connected to a car navigation system or
“PlayStation”.
If the time set for this function comes while the Ir exchange function is operating, this
function will be disabled. (However, the Auto power OFF screen is displayed when the mova
returns to the stand-by display.)
Timer
Sounding an Alarm After a Specified Time
Kt85L
1
In the stand-by, enter the time (1 to 99).
Press
t
and select , and then press
t5
to also set the Timer.
The default setting is “3 minutes”, but when you enter a time and press
t
, the Timer starts.
You can set the length of time between 1 second and 99 minutes 59 seconds when
selecting the timer with this procedure.
2
Press
C6
.
When 10 minutes
(10) is entered
The Timer starts.
Press
t
(Stop) to stop the Timer. Press
t
again to start the Timer.
Note You can change the notification tone (
n
P.105) and its volume (
n
P.108) for the Timer.
The Timer ends if a call or mail is received while the Timer is being used.(Self mode is
excluded.)
e̲n500.book Page 216 Tuesday, August 9, 2005 1:15 PM