Docomo mova SH506iC, Руководство пользователя

Страница: 297 / 588

295
U
s
ing the
M
ess
age
Ser
v
ices
Messages are held at the i-mode center if they arrive during a call or when the mova is
outside the service area, turned off or in Self mode. (
n
P.293)
You can check for messages at the i-mode center, and retrieve any messages held there.
You can set the type of check (i-mode mail, Message Request, Message Free) to be performed
at the i-mode center during Check new message (
n
P.360).
Even when “Receive option setting” is “ON”, mail and messages are received if you check
for new messages.
If you check for new messages and do so again while “
R
” is still flashing, the types that were
inquired in the previous check are not checked.
The default setting is to check for all types.
Check New Message
Checking for Messages at the i-mode Center
Ki4L
1
In the stand-by, press
t
and select , and then press
t4
.
Check new message begins.
Following the settings for Check new messages (
n
P.360), messages are checked in the
order of “i-mode mail”
O
, “Message Request”
O
and “Message Free”.
(Marks indicating checking (“
B
”, “
A
”, “
B
”) are displayed in order.)
To cancel reception
While receiving, press
t
.
Messages that were canceled during reception are held at the i-mode center (“
G
/
I
” lights).
Mail and messages may be received, depending on when you cancel.
2
The results of Check new message are displayed. If there are new
mail or messages, the mail/message ring tone sounds.
Check new message is completed.
“0” is displayed as the number of messages when no mail or messages are held at the
center.
3
In the message received results screen, select “Message R” or
“Message F”, and then press
t
.
The message list is displayed.
To not display the messages immediately
If no operations are performed on the message received results screen, after about 30
seconds the mova returns to the i-mode menu.
When this occurs, the mova remains in i-mode stand-by (“
J
” flashes).
Return to the stand-by display, and then press
H
to exit i-mode.
Messages received during Check new message are not displayed automatically.
4
Select the message to display, and then press
t
.
Refer to
P.297 for details on how to view messages.
Note You can also check for new messages by pressing
m7
or
mm
in the stand-by.
When the mova is closed or in Viewer position, you can check for new messages by
pressing
,
for at least 1 second.
e̲n500.book Page 295 Tuesday, August 9, 2005 1:15 PM