Docomo mova SH506iC, Руководство пользователя

Страница: 190 / 588

Chang
ing Di
spla
y a
nd Key
Sett
ings
188
Switching the Sub Display
A caller’s name and phone number can be displayed in the sub display when a call is received.
The default setting is “ON” (display).
The sub display contrast can be adjusted to 5 different levels.
The default setting is “Contrast 3”.
Pressing the shutter with the mova closed activates the Vibrator (
n
P.98) and allows
you to check missed calls (
n
P.68), recorded messages and new mail.
Displaying Caller Information When a Call is Received
<Caller ID Display>
Kt221L
1
In the stand-by, press
t
and select , and then press
t221
.
The caller ID display screen is displayed.
2
Press
1
(ON: Set Caller ID display) .
To not display the caller’s name or still picture
Press
2
.
Adjusting the Sub display Contrast <Contrast>
Kt222L
1
In the stand-by, press
t
and select , and then press
t222
.
The current contrast is displayed.
2
Select a contrast level.
Press
o
to increase brightness and press
p
to decrease brightness.
3
Press
t
when finished adjusting.
The screen is displayed with the set brightness when the mova is closed.
Using Vibrator Mode to Confirm Incoming Calls and Mail
1
Press the shutter.
When there are missed calls, recorded messages, or unread mail, “Pattern 1” will activate
twice.
When there are no missed calls, recorded messages, or unread mail, “Pattern 2” will
activate twice.
Keep in mind that the Vibrator will not function with the shutter half-pressed.
Note Received calls and mail cannot be confirmed when not in the stand-by display.
For vibration pattern, refer to P.98.
e̲n500.book Page 188 Tuesday, August 9, 2005 1:15 PM