manualshive.com logo in svg

Docomo mova SH506iC, Руководство пользователя, Страница: 448 / 588

Поделиться
Скачать
Docomo mova SH506iC Скачать руководство пользователя страница 448

446

About the miniSD Memory Card

Ma
nagi

ng Dat

a

Using the miniSD memory card adapter

Have the label on the miniSD memory card and the miniSD memory card adapter facing 
the same direction, and push in the direction of the arrow.

To remove the card, grasp the miniSD memory card using the groove on the miniSD 
memory card adapter, and then pull out of the adapter.
Do not attach the miniSD memory card adapter to a PC or other device when there is no 
card inserted in the adapter. This may damage the device or adapter.
Do not remove a miniSD memory card from the adapter while the adapter is attached to a 
PC or other device. This may cause the device to malfunction.
Depending on the device to which it is attached, you may not be able to use miniSD memory 
cards inserted into the adapter.

2

Remove the miniSD memory 
card.

Pull the card out slowly and straight. 
After removing the card, close the 
miniSD memory card slot cover.

Note

Always refer to the instructions included with the card when using the miniSD memory card.
Do not remove the card with the miniSD memory card slot aimed at your face. The card may 
pop out of the slot when you remove your finger.
When removing the miniSD memory card, gently push in the miniSD memory card in until 
you hear a click, and then remove the miniSD memory card. If you pull the card out forcibly, 
the mova or miniSD memory card may be damaged.
After removing a miniSD memory card, always store the card in the protective case provided 
with the card. If you store the miniSD memory card in another card’s protective case, the 
card may stop functioning.

Precautions on handling miniSD memory cards

Do not disassemble or modify the miniSD memory card.
Do not subject miniSD memory cards to strong shocks, bend them, drop them, or expose 
them to water.
Do not touch the metal terminals with your hands or metal objects.
Do not leave the card where it may be exposed to high temperatures, such as in an 
automobile or a location exposed to direct sunlight.
Do not leave the card in humid or dusty locations.
Do not leave the card in the presence of corrosive gases.
Do not expose miniSD memory cards to flames or throw them in fires.

e̲n500.book  Page 446  Tuesday, August 9, 2005  1:15 PM

Содержание mova SH506iC













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов