Docomo mova SH506iC, Руководство пользователя, Страница: 503 / 588

501
Us
ing O
the
r Func
tion
s
By using a DoCoMo data communication device, such as the “Mobile Card Triplex N”, you
can perform data communications or fax communications from a PC connected to the
mova (at 9600bps).
Make sure that you are in an area where you can use the phone and that the settings for the
modem card have been setup in advance.
You can use command operations on the PC (AT command setting) to switch between
ordinary calls and data communications.
To communicate data
No special settings are necessary on the mova for automatic or manual calls.
The current communication status is displayed on the mova display if data communications
are available during a call. If you are connected to a party that is registered in the
Phonebook, the registered name is displayed instead of the phone number.
Refer to the manual provided with the optional device for details.
Fax transmissions with a G3 fax
No special settings are necessary on the mova for automatic or manual calls.
Fax transmissions with a G4 fax (with G3 fax function)
Perform the following settings, and send the fax after checking that the Fax mode setting
is set to ON.
The default setting is “OFF”.
You can also perform this operation during a call.
Do not perform the following operations during fax transmissions with a G3 fax.
Refer to the manual provided with the optional device for details.
Data Communications and Fax Transmissions
Data Communications and Fax
Transmissions (Optional)
Kt45L
1
In the stand-by, press
t
and select , and then press
t45
.
The fax mode screen is displayed.
During a call, press
t2
.
2
Press
1
(ON: Set).
If Fax mode is set to ON, the mova is connected to a Mobile DP card or adapter, and you
are in the middle of the call, you will be able to use fax transmissions.
To disable
Press
2
.
Note You cannot perform data/fax communications from the earphone/microphone socket.
Some faxes may require the settings to be changed. Consult with the fax manufacturer for details.
If you use data/fax communications in a location where the signal status is poor or while on
the move, data/fax communications may not end correctly. We recommend using locations
where the signal is strong.
Optional extras for the mova such as “Modem unit” and “Fax unit” cannot be used.
DoPa is not supported by this mova.
Fax mode automatically returns to OFF when fax transmissions are completed.
e̲n500.book Page 501 Tuesday, August 9, 2005 1:15 PM