Docomo FOMA D905I, Руководство пользователя

Страница: 507 / 513

38
Disconnection reason list
■
Packet communication
■
64K data communication
Error messages list
Supplement to AT command
■
Command name: AT+CGDCONT= [parameter]
Sets the dialup connection (APN) for packet
communication.
Format
AT+CGDCONT= [<cid> [, “<PDP_TYPE>”
[, “<APN>”]]]
Parameter description
<cid>: 1 to 10
“mopera.ne.jp” is registered in cid 1, and
“mopera.net” in cid 3.
<PDP_TYPE>: IP or PPP
<APN>: Optional
Example of execution
The command used to register an APN named “abc”
by PPP connection (when <cid>=2).
AT+CGDCONT=2, “PPP”, “abc”
Operation performed when parameter is omitted
AT+CGDCONT=
Clears all <cid> settings. However, entry for
“<cid>=1” and “<cid>=3” is restored to the default
setting.
AT+CGDCONT=<cid>
Clears the specified <cid> settings. However, entry
for “<cid>=1” and “<cid>=3” is restored to the
default setting.
AT+CGDCONT=
？
Displays a list of assignable values.
AT+CGDCONT
？
Displays the current setting values.
■ Command name: AT+CGEQMIN= [parameter]
Registers the criteria for judging whether to approve
QoS provisioned by the network when PPP packet
communication is established.
Format
AT+CGEQMIN= [<cid>[,,<Maximum bitrate
UL>[,<Maximum bitrate DL>]]]
Parameter description
<cid>:1 to 10
“mopera.ne.jp” is registered in cid 1 and
“mopera.net” in cid 3.
<Maximum bitrate UL>: None or 384
<Maximum bitrate DL>: None or 3648
For “Maximum bitrate UL” and “Maximum bitrate
DL”, the minimum communication speed (in kbps)
is set for both upload and download traffic between
the FOMA terminal and the base station. If the
parameter is set to “None (default)”, all speeds are
permissible. However, if “384” and “3648” are set,
any connection at a speed less than the above limit
is not permitted, and chances are that packet
communication will not be connected.
Value Reason
26 APN is not present or is incorrect.
27
30 Disconnected by network.
33 Terminal is not subscribed to packet
communication.
36 Normal disconnection
Value Reason
1 Specified number does not exist.
16 Normal disconnection
17 Communication is impossible because remote
device is busy.
18 You made a call but did not receive a response
within the specified time.
19 A call was made to the other party, but no
response.
21 The remote device rejected incoming calls.
63 The service and option of the network are not valid.
65 Unavailable processing speed was specified.
88 You made a call to a terminal or received a call
from a terminal with different terminal properties.
No. Text display Reason
1 no connection
to phone The FOMA terminal is not
connected.
10 SIM not
inserted No UIM (FOMA card) is set.
15 SIM
wrong A SIM other than UIM (IC card
equivalent to UIM) is inserted.
16 incorrect
password Incorrect password
100 unknown Unknown error
Next
▲
D905i_E_Manual.fm 38 ページ ２００７年１０月１６日 火曜日 午前１１時５５分