Docomo FOMA D905I, Руководство пользователя

Страница: 473 / 513

4
FOMA communication configuration file
Install the FOMA communication configuration file on a
PC from the attached CD-ROM before connecting the
FOMA terminal to a PC to perform data
communication.
FOMA PC configuration software
When the FOMA PC configuration software (found on
the attached CD-ROM) is installed on a PC, a number
of settings required for packet communication or 64K
data communication via connection between the
FOMA terminal and PC can be made from the PC by
simple operation.
Before installation/uninstallation
･
Installing/uninstalling the FOMA communication
configuration file or the FOMA PC configuration
software can only be performed by a user with
administrator privileges. Attempts made by other
users may result in errors. For Windows Vista, when
the screen of ユーザーアカウント制御 (User account
control) appears, click 許可 (Permit) or 続行
(Continue). For details on PC administrator
privileges, refer to the instruction manual of the PC or
contact your PC manufacturer or Microsoft
Corporation.
･
Before starting operation, make sure that no other
program is running. If there is any active program,
save and exit the program before operation.
Connecting the FOMA terminal to a PC
The connection should be made with the PC and the
FOMA terminal both switched on.
･
Be sure to install the FOMA communication
configuration file before connection.
☛
P5
Connecting to PC
Connect by using the FOMA USB Cable with Charge
Function 01 (optional).
a
Open the cap on the FOMA terminal’s external
connection terminal
b
Insert one end of the FOMA USB Cable with Charge
Function 01 into the FOMA terminal’s external
connection terminal until it clicks
c
Insert the other end of the FOMA USB Cable with
Charge Function 01 into the PC USB connector
･
When a PC and the FOMA terminal are
connected,
appears on the screen of the
FOMA terminal. does not appear before
installing the FOMA communication configuration
file.
･
If you connect the FOMA terminal to a PC before
installing the FOMA communication configuration
file, the detecting wizard screen of new hardware
will be displayed. In that case, remove the FOMA
terminal and click
キャンセル
(Cancel) to exit the
wizard.
■
Removing FOMA USB Cable
Pull the connector for PC out from the side of PC.
Be sure to press release buttons on both sides of
the connector for the FOMA terminal. Forcing to pull
it out may cause a malfunction.
INFORMATION
● Do not remove the FOMA USB Cable with Charge
Function 01 during data communication, or give shock to
the FOMA terminal. It may cause the interruption of
charging or data communication, malfunction or failure of
PC or the FOMA terminal, or loss of data.
Setting to Communication mode
In case USB Mode Setting is set to
microSD mode
or
MTP
mode
, set this to
Communication mode
.
a
m z
LifeKit
z 26 z 1 z
Yes
Connector
(label facing up)
Release button
USB connector
D905i_E_Manual.fm 4 ページ ２００７年１０月１６日 火曜日 午前１１時５５分