Docomo FOMA D905I, Руководство пользователя

Страница: 503 / 513

34
AT ＊ DGARL=n [,cid] Specifies dialup connections (APNs) to reject incoming packet calls from them. For an APN, use the
cid parameter defined with “+CGDCONT”.
n=0: Adds the APN defined with the cid parameter to the call rejection list.
n=1: Deletes the APN defined with the cid parameter from the call rejection list.
When you omit the cid parameter, all cids will be added or deleted.
ex. Enter AT ＊ DGARL=0,1 Display AT ＊ DGARL? Test AT ＊ DGARL=?
AT
＊
DGPIR=n Specifies whether to notify the caller ID for packet communication. This specification is effective both
for incoming and outgoing calls.
n=0: The APN is used as it is when a packet communication is established. (default)
n=1: Adds “184” to the APN when a packet communication is established.
n=2: Adds “186” to the APN when a packet communication is established.
ex. Enter AT
＊
DGPIR=0 Display AT
＊
DGPIR? Test AT
＊
DGPIR=?
AT ＊ DRPW Shows the level of power reception in the format of “ ＊ DRPW:m”, where the value of m ranges from 0
to 75.
ex. Enter AT
＊
DRPW Display None Test AT
＊
DRPW=?
+++ Changes the FOMA terminal mode from the online data to the online command. The duration of
escape guard is fixed to 1 sec.
ex. Enter +++ Display None Test None
AT+CAOC Displays last call cost.
ex. Enter AT+CAOC Display AT+CAOC? Test AT+CAOC=?
AT+CBC Displays the FOMA terminal’s battery level in the “+CBC:bcs,bcl” format.
bcs=0: Powered by the battery pack
bcs=1: Not powered by the battery pack
bcs=2: Battery pack removed
bcs=3: Power-supply error
bcl=0: No battery remained or battery pack removed
bcl=1 to 100: Battery remained
ex. Enter AT+CBC Display None Test AT+CBC=?
AT+CBST=n,1,0 Sets the line to use (Setting of bearer service).
n=116: 64K data communication (default)
n=134: 64K videophone
*1, *2 ex. Enter AT+CBST=116,1,0 Display AT+CBST? Test AT+CBST=?
AT+CEER Shows a disconnection reason of the previous communication.
☛
P38
ex. Enter AT+CEER Display None Test AT+CEER=?
AT+CGDCONT Specifies the APN for packet communication.
☛
P38
AT+CGEQMIN Specifies the criteria for judging whether to approve the QoS (Quality of Service) level provisioned by
the network when the packet communication is established.
☛
P38
AT+CGEQREQ Specifies the QoS level requested to the network when transmission is performed during packet
communication.
☛
P39
AT+CGMR Shows the version of your FOMA terminal with a 16-digit number.
ex. Enter AT+CGMR Display None Test AT+CGMR=?
AT+CGREG= [n] Determines whether to notify the network registration state. Either “inside the service area” or “outside
the service area” is notified.
n=0: Not notified. (default and when parameter omitted)
n=1: Notified in the format of “+CGREG:n,stat”.
stat=0: Outside the service area stat=1: Inside the service area (home) stat=4: Unknown
stat=5: Inside the service area (visitor)
*1, *2 ex. Enter AT+CGREG=1 Display AT+CGREG? Test AT+CGREG=?
AT+CGSN Shows the manufacturer’s serial number of the FOMA terminal.
ex. Enter AT+CGSN Display None Test AT+CGSN=?
AT+CLIP= [n] Specifies whether to show the caller ID of an incoming 64K data communication on the PC’s screen.
n=0: Does not show the information. (default and when parameter omitted)
n=1: Shows the information.
If you enter “AT+CLIP?”, it shows “+CLIP:n,m”.
m=0: The network setting that does not show caller ID to the other party when originating a call.
m=1: The network setting that shows caller ID to the other party when originating a call.
m=2: Unknown
*1, *2 ex. Enter AT+CLIP=0 Display AT+CLIP? Test AT+CLIP=?
Command Description & Parameter
Next
▲
D905i_E_Manual.fm 34 ページ ２００７年１０月１６日 火曜日 午前１１時５５分