Docomo FOMA D905I, Руководство пользователя

Страница: 311 / 513

309 Data Display/Edit/Management
Checking the memory status of the FOMA
terminal
Memory Status
The memory usage state of Data Box (excluding
videos) and the i-
α
ppli data storage area in the FOMA
terminal is displayed.
1
m z
Settings & NW services
z 79
3
INFORMATION
●
On the folder list screen of Music Player, i-
α
ppli or each
data type (excluding 1Seg) in Data Box:
m z
Check
memory
●
The memory usage of
My Picture
includes the memory
size used for 1Seg images.
Infrared communication
You can send and receive data to/from other FOMA
terminals, mobile phones or PCs supporting infrared
communication. Also, by using the i- α ppli compatible
with infrared communication, you can operate other
devices that support infrared communication.
･
During infrared communication or saving received
data, is displayed at the top of the screen and
the terminal is in the data transfer mode (the same
status as outside the service area). In this mode,
phone calls, i-mode connection and data
communication are disabled. Also you cannot switch
to other functions by pressing
b
. Note that you
cannot use infrared communication during a call,
i-mode or data communication because you cannot
use the data transfer mode.
･
The infrared communication function of the FOMA
terminal conforms to IrMC 1.1.
･
Even if the terminal of the other party conforms to
IrMC 1.1, some data may not be sent/received
depending on the data type.
Using infrared communication
The maximum communication range is about 20 cm
and the angle is within 15 degrees from the center.
Keep the FOMA terminal pointing at the other device’s
infrared data port and do not move it until all the data
have been sent or received.
･
Infrared communication may not work properly in a
place with direct sunlight or right under fluorescent
lamps.
Sending data by infrared communication
Send Ir Data
You can send data by selecting one item at a time or
send all data items of a specified function in a batch.
The following data are available for sending:
: Sending all data is available
The usage rate of the storage
area is indicated in a different
color for each data type.
･
When you select a data
type, the usage rate of
the data is shown in the
Used
: field.
･
To switch between
Kbytes and Mbytes:
t
Data type Remarks
Phonebook
･
PushTalk phonebook data and Own
Number data are also sent when
sending all is performed. When a
phonebook group with the secret
attribute is sent, the secret attribute is
removed from the group and set for
each phonebook entry within the group
before sending.
･
In
Ph.book image sending
of Data
Exchange Setting, you can set whether
to send still images saved in the
phonebook together with the phonebook
data when sending all is performed.
･
Images saved in the phonebook may
not be received depending on the
receiving device.
Schedule
−
Infrared data port
Within approx.
20 cm
15 °
15 °
Next
▲