Docomo FOMA D905I, Руководство пользователя, Страница: 34 / 513

32 Before Using the Handset
･
You can also perform the same operation when
the following icons appear:
: Update notification icon
☛
P434
/ :
Auto-update to the latest pattern definition
succeeded/failed
☛
P438
/ :
Music&Video Channel program reception
succeeded/failed
☛
P321
/ :
Video recording succeeded/failed
☛
P264
/ / :
Sending location information of GPS Location
Request succeeded/failed/stopped without
confirmation
☛
P245
: Being connected to external device via the
FOMA USB Cable with Charge Function 01
(optional)
☛
P302
INFORMATION
●
When you highlight an icon and hold down
c
for over
a second, the icon temporarily disappears from the
screen. It reappears when the number of stored items
changes. For the icon indicating voice mail messages, a
confirmation screen appears when you hold down
c
for over a second. Select
Yes
to clear it temporarily.
Using the UIM (FOMA card)
The UIM (FOMA card) is a card in which your phone
number and other information are recorded. Insert the
UIM into the FOMA terminal to use it.
･
For details on handling the UIM, refer to the UIM
manual.
Inserting/removing the UIM
Use your FOMA terminal with the UIM inserted. If the
UIM is not inserted in your FOMA terminal, first insert it.
･
Be sure to turn the power off and close the FOMA
terminal. Insert or remove the UIM using both hands.
a
Remove the back cover and then the battery
pack.
☛
P34
b
Pull out the tray.
Place your finger on the tray and slide it out until the
tray stops.
c
With the IC side of the card facing up, slide the
UIM on the tray to match the cut corner of the
UIM to the cut corner of the tray.
d
Push the tray in until it stops.
e
Reattach the battery pack and then the back
cover.
☛
P34
a
Pull out the tray.
･
The operations are the same as
a
to
b
in
“Inserting”.
b
Pull out the UIM.
INFORMATION
● Insert or remove the UIM carefully as forcing it may
damage the card.
●
Carefully handle the removed UIM so that it does not
become lost.
●
When attaching the battery pack, make sure that the UIM
tray is in place. If not, you cannot attach the battery pack.
Forcibly attaching the battery pack may damage the UIM or
the tray.
● When pushing the UIM tray in, make sure that the UIM is
properly placed in the tray. Forcibly pushing the tray into
the FOMA terminal may cause an operation error.
Inserting
Removing
When the UIM tray is removed
UIM
Cut corner
IC
Tray
Cut corner
Tray is pulled out until it stops.
Insert and push the tray
straight in.
●
Remove the UIM before
replacing the tray.