Docomo FOMA D905I, Руководство пользователя, Страница: 241 / 513

239 GPS Function
1
m z
LifeKit
z 71
The positioning starts.
･
There are 3 levels of positioning, which are
defined below.
★★★ : Nearly precise location information (with
an error of less than 50 m)
★★☆ : Relatively precise location information
(with an error of less than 300 m)
★☆☆ : Approximate location information (with
an error of 300 m or above)
The positioning level is a mere estimate. It may
vary from the actual value depending on ambient
radio wave conditions.
･
To discontinue the positioning halfway and
display the positioning result screen:
p
while
Use
is displayed in the guide row on the
positioning-in-progress screen
･
To cancel the positioning:
c
on the
positioning-in-progress screen
･
To retry the positioning after completion:
p
on
the positioning result screen
2
Select a function
■ Reading a map:
1 z o
The FOMA terminal is connected to i-mode to
show a map. After the map is displayed, you can
use i-area to check the area-related information.
For details about i-area, visit the DoCoMo
website.
■ Starting GPS-compatible i-
α
ppli:
2 z
Highlight an i- α ppli
z o
■ Attaching location information to mail:
3
The mail composition screen is displayed.
･ 位置メール
(Location Mail) is entered as the
subject of the mail and and the URL of the
location information are entered as part of the
message text. The location information URL is
also counted as part of the characters in the
message.
･
The location information you send can be
viewed only on the i-mode compatible
terminal.
■
Adding to the phonebook:
4
■ Updating the phonebook:
5 z
Highlight
phonebook data
z o
■
Displaying location information:
6
INFORMATION
● If the positioning takes time because of poor signal
conditions, a confirmation screen appears. Select
Yes
to
continue the positioning,
No
to terminate it, or
Retry
to
retry it.
･
Even if you set Position Accuracy (
☛
P250) to the
standard mode, retry of positioning will be performed in
the quality mode.
･ Retry
is not displayed outside Japan.
● If positioning fails, a confirmation screen appears. Select
Yes
to retry positioning.
●
Even if you set sound and vibration alters, they will not
work when you retry positioning by Position Location.
● When positioning starts, the Enter key lights or flashes
according to the settings of Positioning Alert of Position
Location. You can also set sound and vibration to alert
you.
☛
P91
Setting the function to be performed when you
check your current location
Post-Position Task
Set a function that is to be performed upon completion
of positioning when you activate Position Location from
the custom menu.
･
This function is effective if you register Position
Location in the first layer of the custom menu and
activate Position Location by holding down a dial key
for over a second on the standby display.
･
Select a function to perform from among
Read map
,
Run i-
α
ppli
,
Paste to mail
,
Add to phonebook
and
Confirm each time
. With
Confirm each time
, you can
select a function after positioning.
1
m z
LifeKit
z 741 z 1
-
5
Positioning-in-progress screen
Current positioning level
Positioning level upon
completion
Positioning result screen
Blinking while positioning
Date of positioning
Latitude (N: north latitude;
S: south latitude)
Longitude (E: east longitude;
W: west longitude)
Geographical coordinate
system
･ Criteria used when a
location on the Earth is
expressed by latitude and
longitude.
WGS84 : World Geodetic
System;
Tokyo : Tokyo Datum
Positioning level