Docomo FOMA D905I, Руководство пользователя, Страница: 361 / 513

359 Other Convenient Functions
Resetting the call cost automatically
Reset Call Cost
Total call cost is set to zero automatically on the 1st
day of each month.
1
m z
Settings & NW services
z 79
24
2
Enter the terminal security code
z 1
･ To cancel: Enter the terminal security code
z
2
3
Enter the PIN2 code
INFORMATION
●
Even if the setting is
ON
, the setting is canceled when
the UIM different from the one used during the setting is
inserted and then turn the power on. It does not return to
the previous setting even if the UIM used when setting it
is inserted again.
● When the setting is
ON
, the call cost will be reset if you
change the date and time to the next month in Date and
Time Setting.
●
When the setting is
ON
, if the terminal is not turned on or
if you are talking on the terminal at 00 o’clock of the first
day of the month, a reset will take place when you turn
the power on or end the call.
●
If the setting is
ON
, the PIN2 code is required when you
turn the power on and the terminal security code is
required when you set the date and time.
Setting to notify the limit of call cost
Call Cost Limit
Set the maximum limit of call cost, and when the total
call cost exceeds the set amount, it is notified with an
alarm or icon.
･
The amount shown in Call Cost Limit is only an
estimate and should not be regarded as the actual
amount for billing.
1
m z
Settings & NW services
z 79
22
2 Enter the terminal security code
z
Set each
item
z p
INFORMATION
●
If the call cost exceeds the maximum limit while talking or
during communication,
is displayed at the top of the
display.
●
When
Sound
+
icon display
is set for
Alert method
, the
alarm sounds and message informing that the call cost
exceeds the maximum limit is displayed on the standby
display after a call/communication. In the general silent
mode, a message appears but the alarm does not sound.
In the personalized silent mode, the alarm sounds
according to the call alert volume set for Customize
Silent Mode. If the call cost exceeds the limit during a call
or communication at 00 o’clock of the first day of the
month when Reset Call Cost is
ON
, neither the alarm
sounds nor the message appears.
●
The alarm sounds at the volume set for the call alert
volume.
●
If any key is pressed or other function is started while an
alarm is sounding, the alarm sound stops. If Key Lock is
temporarily canceled, closing the FOMA terminal also
stops the alarm.
●
Even if the UIM is replaced after Call Cost Limit is set to
ON
, the setting is stored.
Removing the icon of alert
Hide Call Cost Icon
1
m z
Settings & NW services
z 79
23 z
Enter the terminal security code
z
Yes
Using Calculator
Calculator
You can perform addition, subtraction, multiplication
and division (
＋
,
−
,
×
,
÷
) on your FOMA terminal.
･
Up to 8 digits can be entered.
･
You can activate the calculator from the entry fields
for the scheduler or notepad and paste the result of a
calculation into the entry field.
☛
P374
1
m z
Accessory
z 4
Alert
：
Set whether to notify when the total call cost
exceeds the set amount.
Limit
：
Set the maximum amount of call cost (10 to
100,000 yen, 10 yen unit).
Alert method
：
Select the alarm with icon or the icon only.
･ For
Sound
+
icon display
, set
Alert sound
and
Alert time
.
Alert sound
：
Select an alarm sound from the melody list.
Alert time
：
Specify how many seconds alarm sounds (1 to
60 sec.).
Next
▲