Docomo FOMA D905I, Руководство пользователя

Страница: 429 / 513

427 Appendix/External Devices/Troubleshooting
Infrared
Failed to connect via
authentication.
Sending all data was failed because
the authentication password is not
correct. Enter the same
authentication password between
sender and receiver.
Infrared
No response. Retry data
exchange?
After entering into the infrared
communication state, the specified
time has elapsed with no other
terminals for communications found.
Point the FOMA terminal at the other
terminal’s infrared data port with a
distance of 20 cm or less and select
Yes
.
☛
P309
Infrared
No UIM. Unable to start
requested software.
Even when i-
α
ppli To is set in the data
received by infrared communication,
starting is unavailable due to UIM
operation restriction.
☛
P33.
Infrared
Unable to switch to data
transfer mode.
FOMA terminal is in data
communication. Processing cannot
be performed because switching to
data transfer mode is unavailable.
Terminate the communication or
retry the operation later.
Input error (205)
Input data for i-mode sites or
websites contain error. Check the
input data for errors.
Insert UIM.
The UIM is not inserted. Please use
your FOMA terminal after inserting
the UIM.
☛
P32
Insufficient memory.
Operation is interrupted due to
insufficient memory.
In case this message appears
frequently, turn power off and then
back on.
Invalid data. Connection
cannot be established. (400)
･
Cannot be connected because of
the error in i-mode sites or websites.
The URL may be incorrect. Make
sure that the URL is correct.
･
Within service area, sending auto
send mail was unsuccessful.
Invalid data. Failed to save.
Attached melodies or movie/i-motion
files cannot be played because of the
incorrect data.
Invalid data included.
i-
α
ppli cannot be started from invalid
data read with Bar Code Reader.
Invalid microSD. Unable to
use Digital Rights
Management function.
The authentication area in the
microSD memory card could not be
referred due to some cause.
The data of Movable Contents
cannot be saved in the microSD
memory card in which an error has
occurred.
Invalid UIM or phone
type.Unable to use.
Cannot be played because the
different UIM from that used when
saved is inserted or the model is
different.
Invalid UIM, requested
service not available.
Operation is unavailable due to the
function of UIM operation restrictions.
Insert the same UIM as used when
those data or files were saved to use
it.
Invalid UIM, requested
software failed to start.
The specified i-
α
ppli cannot be
started due to the function of UIM
operation restrictions. Insert the
same UIM as used when the i-
α
ppli
was downloaded to use it.
Is the ToruCa automatic
reading function in a mobile
phone used through the
reader/writer?
Select
Yes
to use ToruCa and make
the setting of ToruCa Auto-read to
ON
.
Memory full. Delete
unwanted data.
Unable to register/delete in the
PushTalk phonebook and add/edit/
delete members in group because
the memory space for the FOMA
terminal phonebook is insufficient,.
Delete the unnecessary data in the
FOMA terminal phonebook.
Memory is full. Unable to
save.
The FOMA terminal does not have
enough memory space and SMS
cannot be saved. Move SMS to UIM
or delete i-mode Mail or SMS.
Memory shortage. Quit
application.
The running function is terminated
due to insufficient memory.
Message cannot be read. Still
retrieving message data.
･
The object mail data cannot be
referenced because mail or folder
is used for another processing.
･
Mail data cannot be referenced in
chat mail.
Message kept in center.
SMS messages have already been
sent.
microSD damaged. Saving to
phone memory.
When
microSD
has been set as the
destination for saving still images or
movies but the microSD memory
card cannot be accessed, the
destination automatically switched to
Phone
.
microSD full. Saving to phone
memory.
When the microSD memory card
becomes full with
microSD
set as the
destination for saving still images or
movies recorded with the camera or
Chara-den, the destination is
automatically switched to
Phone
.
microSD memory full.
Because there is not enough
available storage space in microSD
memory card, data cannot be
copied, moved, backed up or
information update is unavailable.
Delete unnecessary data.
☛
P300
No assigned channel.
The channel cannot be viewed
because the service is suspended,
etc.
No content is available. (204)
Could not find data at the specified
site.
No requested software.
The i-
α
ppli specified by the mail and
external equipment is not stored in
your FOMA terminal.
Next
▲