DigiDesign Pro Tools, Справочное руководство

Страница: 703 / 886

Chapter 30: Automation 689
Chapter 30: Automation
Pro Tools features dynamic automation of mix-
ing controls on each of the track types. You can
write automation moves and view them in real
time during playback of your session. You can
also edit automation data with the same tech-
niques you use to edit audio and MIDI data.
Automation Accuracy with
Control Surfaces
Digidesign Control Surfaces
Digidesign’s D-Con-
trol, D-Command, ProControl, Control|24, and
Command|8 control surfaces support the auto-
mation features in Pro Tools. Digidesign control
surfaces provide 10-bit resolution, or 1,024 steps
of fader resolution. Pro Tools interpolates this
input to 24-bit resolution on playback, resulting
in extremely accurate and smooth fader auto-
mation.
MIDI Control Surfaces Most MIDI control sur-
faces have 7-bit resolution, or 128 steps.
Pro Tools interpolates this input to 24-bit reso-
lution on playback, resulting in accurate and
smooth fader automation.
Automation QuickStart
Pro Tools provides many options for recording,
replacing, and editing automation data.
The basic steps for automation recording are:
• Enable the automation type that you want to
record (volume, pan, mute, send level, send
pan, send mute, or plug-in automation).
• Put the appropriate tracks in an automation
writing mode (Write, Touch, or Latch, or a
Trim mode).
• If you are automating a plug-in, enable the in-
dividual plug-in controls to be automated.
• Automation Safe any plug-ins, outputs, or
sends that have existing automation data that
you want to protect from being overwritten.
• Begin playback to begin automation record-
ing, and adjust controls as needed. Pro Tools
remembers all moves performed on enabled
controls.
To edit automation once it has been recorded,
you can:
• Repeat the above steps to write new automa-
tion over the previous data.
• Graphically edit the automation data in the
Edit window.
• Cut, copy, paste, or delete automation data
(certain restrictions apply).
For details on using Digidesign control sur-
faces to create mix automation, refer to
your
Digidesign control surface guide
.