DigiDesign Pro Tools, Справочное руководство

Страница: 399 / 886

Chapter 18: Editing Basics 385
To exit Shuttle Lock mode, do one of the following:
■
Press Stop in the Transport window.
– or –
■
Press the Spacebar.
Custom Shuttle Lock Speed
Use the Custom Shuttle Lock Speed preference
to customize the highest fast-forward Shuttle
Lock speed (key 9) to better match your editing
and auditioning needs.
To configure Custom Shuttle Lock Speed:
1
In Pro Tools, select Setup > Preferences and
click the Operation tab.
2
Be sure that the Numeric Keypad mode is set
to Transport or Classic (see “Operation Prefer-
ences” on page 66).
3
Enter a desired percentage for the Custom
Shuttle Lock Speed setting. The range for this
setting is 50–800%. You can use the Up and
Down Arrow keys to increase or decrease the set-
ting.
4
Click OK.
The Custom Shuttle Lock Speed will be saved
with your Pro Tools preferences (not with the
session).
To enable Custom Shuttle Lock Speed:
■
Press Start+9 (Windows) or 9 (Mac)
on the numeric keypad.
Numeric Keypad Set to Shuttle
(Pro Tools HD Only)
Pro Tools offers another form of shuttling, dif-
ferent from that of Shuttle Lock mode. With the
Numeric Keypad mode set to Shuttle, playback
of the current Edit selection is triggered by press-
ing and holding the keys on the numeric key-
pad—playback stops once the keys are released.
Various playback speeds are available in both
forward and reverse. In this mode, pre- and
post-roll are ignored.
To shuttle with the Numeric Keypad mode set to
Shuttle:
1
Choose Setup > Preferences and click the Op-
eration tab.
2
Set the Numeric Keypad mode to Shuttle and
click OK.
3
With the Selector tool, click in the track where
you want playback to begin. To shuttle on two
tracks, Shift-click in a second track.
4
Press and hold any of the following keys (or
key combinations) on the numeric keypad to
trigger playback.
5
Press a different key to switch the playback di-
rection or speed. Release to stop.
Shuttle Speed Rewind Key Forward Key
1 X Speed 4 6
4 X Speed 7 9
1/4 X Speed 1 3
1/2 X Speed 4+5 5+6
2 X Speed 7+8 8+9