15
P reparing the Macintosh for installation
D ayStar designed the installation of the Turbo 601 to be easy. You mu s t ,
h oweve r, take certain pre c a u t i o n s :
1 .
B a ck up all hard dri ves befo re beginning the installation.
2 .
C h e ck your hard dri ves with Ap p l e ’s Disk Fi rst Aid.
3 .
Update your hard dri ves’ dri ver softwa re with a ve rsion known to be
c o m p a t i ble with the Power Mac. If you are using Apple HD SC Setup, update
your dri ves using ve rsion 7.3.2 or gre a t e r. If you used a non-Apple fo rm a t t e r,
contact the vendor to make sure your ve rsion is PowerPC compatibl e .
4 .
Tu rn off the Mac and re m ove the power cord and all accessory cabl e s .
5 .
P ress the power sw i t ch on the rear of the Macintosh three times to dra i n
the power supply.
6 .
Place the Macintosh on an unobstructed flat wo rk area with the rear of the
Macintosh facing yo u .
Installing the Turbo 601
1 .
Open the Macintosh (This pro c e d u re is detailed in the Apple Getting
S t a rted re fe rence guide).
2 .
Put on the anti-static wrist strap fo l l owing the instructions on the pack age .
3 .
Locate the cache connector and re m ove any card that may be installed there .
View of the inside of the Macintosh IIci
Power Supply
Cache Slot
ROM Connector
NuBus Slots
