Danfoss VLT HVAC Drive FC 100 Series, Руководство по конструкции

Страница: 95 / 207

5.1.5 Lifting
Always lift the Adjustable frequency drive in the dedicated
lifting eyes. For all D and E2 (IP00) enclosures, use a bar to
avoid bending the lifting holes of the Adjustable frequency
drive.
176F
A245.10
Figure 5.2 Recommended Lifting Method, Frame Sizes D and E .
WARNING
The lifting bar must be able to handle the weight of the
Adjustable frequency drive. See
Mechanical Dimensions for
the weight of the different frame sizes. Maximum diameter
for bar is 1 in [2.5 cm]. The angle from the top of the drive
to the lifting cable should be 60
°
C or greater.
130BA832.11
Figure 5.3 Recommended Lifting Method, Frame Size F1
(460V, 600–900 HP, 575/690V, 900–1150 HP)
130BA834.11
Figure 5.4 Recommended Lifting Method, Frame Size F2
(460V, 1000–1200 HP, 575/690V, 1250–1350 HP)
130BA833.11
Figure 5.5 Recommended Lifting Method, Frame Size F3
(460V, 600–900 HP, 575/690V, 900–1150 HP)
130BA835.11
Figure 5.6 Recommended Lifting Method, Frame Size F4
(460V, 1000–1200 HP, 575/690V, 1250–1350 HP)
How to Install
VLT
®
HVAC Drive Design Guide
MG11BB22 - VLT
®
is a registered Danfoss trademark 5-7
5 5