Danfoss VLT HVAC Drive FC 100 Series, Руководство по конструкции

Страница: 70 / 207

A – Top cover
B – Brim
C – Base part
D – Base cover
E – Screw(s)
A B
C
D
E
130B
T323.10
B
A
E
C
D
130B
T324.10
Place the top cover as
shown. If an A or B
option is used, the brim
must be fitted to cover
the top inlet. Place the
base part C at the
bottom of the drive and
use the clamps from the
accessory bag to correctly
fasten the cables. Holes
for cable connectors:
Size A2: 2x M25 and
3xM32
Size A3: 3xM25 and
3xM32
A2 Enclosure A3 Enclosure
Table 3.14
Dimensions
Enclosure type
Height (in
[mm])
A
Width (in
[mm])
B
Depth (in
[mm])
C*
A2 14.6 [372] 3.5 [90] 8.1 [205]
A3 14.6 [372] 5.1 [130] 8.1 [205]
B3 18.7 [475] 6.5 [165] 9.8 [249]
B4 26.4 [670] 10 [255] 9.7 [246]
C3 29.7 [755] 13 [329] 13.3 [337]
C4 37.4 [950] 15.4 [391] 13.3 [337]
* If option A/B is used, the depth will increase (see section
Mechanical Dimensions for details)
Table 3.15
130BB045.10
A
B
C
C
130BB044.10
B
A
A2, A3, B3 B4, C3, C4
Table 3.16
VLT
®
HVAC Drive Selection VLT
®
HVAC Drive Design Guide
3-14 MG11BB22 - VLT
®
is a registered Danfoss trademark
3 3