Display mode II:
This display mode makes it possible to have three op-
erating data values displayed at the same time in line
1. The operating data values are determined in pa-
rameters 007-010
Display readout
.
175ZA685.10
50.0Hz
SETUP
1
AUTO REMOTE RUNNING
100% 7.8A 5.9kW
Display mode III:
This display mode is active as long as the [DISPLAY
MODE] key is kept depressed. In the first line, operat-
ing data names and units of operating data are dis-
played. In the second line, operating data 2 remains
unchanged. When the key is released, the different
operating data values are shown.
175ZA695.10
50.0Hz
SETUP
1
AUTO REMOTE RUNNING
REF% CURR.A.POW.,KW
Display mode IV:
This display mode is only active in connection with lo-
cal reference, see also
Reference handling
. In this
display mode, the reference is determined via the [+/-]
keys and control is carried out by means of the keys
underneath the indicator lamps. The first line indicates
the required reference. The third line gives the relative
value of the present output frequency at any given time
in relation to the maximum frequency. The display is
in the form of a bar graph.
176F
A156.10
40.0Hz
HAND LOCAL RUNNING
USE +/- 40Hz
SETUP
1
0
----60
VLT
®
6000 HVAC Series
MG.61.B5.02 - VLT
®
is a registered Danfoss trademark
95
Pr
ogr
a
mmi
ng
Содержание VLT 6000 HVAC Series
Страница 31: ...Ordering form VLT 6000 HVAC Series MG 61 B5 02 VLT is a registered Danfoss trademark 31 Introduction to HVAC ...
Страница 63: ...Mechanical dimensions VLT 6000 HVAC Series MG 61 B5 02 VLT is a registered Danfoss trademark 63 Installation ...
Страница 75: ...VLT 6000 HVAC Series MG 61 B5 02 VLT is a registered Danfoss trademark 75 Installation ...
Страница 204: ...VLT 6000 HVAC Series 204 MG 61 B5 02 VLT is a registered Danfoss trademark ...