![background image](http://html1.mh-extra.com/html/danfoss/vlt-6000-hvac-profibus/vlt-6000-hvac-profibus_manual_3623281051.webp)
VLT
®
6000 HVAC
51
MG.60.B1.02 - VLT is a registered Danfoss trade mark
Installation
Side-by-side
VLT 6075-6275 IP 00 and IP 20
All IP 00 and IP 20 units in the above-mentioned
series can be installed side by side without any
spacing.
Cooling
VLT 6075-6125
Cooling
All units in the above-mentioned series require a
minimum of 200 mm of air above and below the
enclosure and must be installed on a plane, vertical
surface (no spacers). This applies both to IP 20 and
IP 54 units.
These units can be installed side by side without any
spacing, since they do not require any cooling on the
sides.
■
■
■
■
■
Installation of VLT 6006-6032 200-240 V, VLT 6016-6062 380-460 V IP 20 and IP 54
Side-by-side
IP 20
IP 54 (flange-by-flange)
■
■
■
■
■
Installation of VLT 6042-6062 200-240 V, VLT 6075-6275 380-460 V IP 00, IP 20 and IP 54
VLT 6150-6275
All units in the above-mentioned series require the
minimum of air shown above and below the
enclosure and must be installed on a plane, vertical
surface (no spacers). This applies to IP 00, IP 20 and
IP 54 units alike.
VLT 6075-6275 IP 54