![background image](http://html1.mh-extra.com/html/danfoss/vlt-6000-hvac-profibus/vlt-6000-hvac-profibus_manual_3623281069.webp)
VLT
®
6000 HVAC
69
MG.60.B1.02 - VLT is a registered Danfoss trade mark
Programming
■
■
■
■
■
Control unit LCP
The front of the VLT frequency converter features a
control panel - LCP (Local Control Panel). This is a
complete interface for operation and programming of
the VLT 6000 HVAC.
The control panel is detachable and can - as an
alternative - be installed up to 3 metres away from the
VLT frequency converter, e.g. on the front panel, by
means of a mounting kit option.
The functions of the control panel can be divided into
five groups:
1. Display
2. Keys for changing display mode
3. Keys for changing program parameters
4. Indicator lamps
5. Keys for local operation.
All data are indicated by means of a 4-line alpha-
numeric display, which, in normal operation, is able to
show 4 operating data values and 3 operating
condition values continuously. During programming,
all the information required for quick, effective
parameter Setup of the VLT frequency converter will
be displayed. As a supplement to the display, there
are three indicator lamps for voltage (ON), warning
(WARNING) and alarm (ALARM), respectively.
All VLT frequency converter parameter Setups can be
changed immediately via the control panel, unless this
function has been programmed to be
Locked
[1] via
parameter 016
Lock for data change
or via a digital
input, parameters 300-307
Lock for data change
.
■
■
■
■
■
Control keys for parameter Setup
The control keys are divided into functions. This
means that the keys between display and indicator
lamps are used for parameter Setup, including
selecting the display indication during normal
operation.
[DISPLAY / STATUS] is used for selecting
the indication mode of the display or when
returning to the Display mode from either
the Quick menu or the Extend menu
mode.
[QUICK MENU] gives access to the
parameters used for the Quick menu. It is
possible to switch between the Quick
menu and the Extend menu modes.
[EXTEND MENU] gives access to all
parameters. It is possible to switch
between the Extend menu and the Quick
menu modes.
[CHANGE DATA] is used for changing a
setting selected either in the Extend menu
or the Quick menu mode.
[CANCEL] is used if a change of the selec-
ted parameter is not to be carried out.
[OK] is used for confirming a change of the
parameter selected.