Reference Information:
The Artemis I²C control interface uses 12V signalling levels. Please see the
Technical Manual for further details and a reference interface circuit.
When initially powered up, the motor will perform an initialisation routine as
detailed in the Technical Manual. During initialisation, the unit will slightly
rotate and temporarily draw a current less than or equal to the max rated
current depending on the inertial load.
Quick Start Guide
Overview Limited
Overview House Kingswey Business Park Forsyth Road Woking GU21 5SA United Kingdom
www.overview.co.uk
© Overview Ltd 2021
Artemis
Servotorq II
™
Integrated Servo Motor
Part No. OVU20005
–
OVU20010
Thank you for purchasing Overview’s
Artemis Integrated Servo Motor.
To quickly get up and running with your Artemis motor, please refer to the
Technical Manual, I²C Protocol Guide and Application Notes located at:
http://www.overview.co.uk/technical-support/
•
The Artemis motor uses semiconductors which can be
damaged by electrostatic discharge (ESD). The motor
must be handled and stored in an ESD safe
environment.
•
The Artemis motor
’s
nominal supply is 48V DC, using up
to 1 A DC. Do
not
hot-plug the power supply.
Please observe the following precautions when handling and
operating the Artemis motor:
OVZ20022 Rev 3
