Daikin Aurora Series, Руководство по обслуживанию

Страница: 200 / 333

Troubleshooting by Error Code SiUS341802E
187 Service Diagnosis
2.13 Electronic Expansion Valve Coil Abnormality, Dust
Clogging
Error Code
A9
Applicable
Models
All indoor unit models
Method of Error
Detection
Check coil condition of electronic expansion valve by using microcomputer.
Check dust clogging condition of electronic expansion valve main body by using microcomputer.
Error Decision
Conditions
Pin input for electronic expansion valve coil is abnormal when initializing microcomputer.
Either of the following conditions is seen/caused/ occurs while the unit stops operation.
z
R1T – R2T > 8°C (14.4°F)
z
R2T shows fixed degrees or below.
R1T: temperature of suction air
R2T: temperature of liquid pipe of heat exchanger
Supposed
Causes
„
Defective electronic expansion valve coil
„
Defective indoor unit main PCB
„
Defective relay cables
Troubleshooting
Refer to page 300.
NO
YES
Power is
supplied.
NO
Electronic
expansion valve is
connected to X7A of
indoor unit
PCB.
NO
Check
of electronic
expansion valve coil
indicates normal.
NO
YES
YES
YES
Relay
cables short circuit
or disconnected.
When restarting the operation
after shutting the power supply
OFF does not work, replace the
indoor unit main PCB (A1P).
Replace the relay cables.
Replace the electronic
expansion valve coil (Y1E).
Shut the power supply OFF
after connection and then
restart.
Replace the electronic
expansion valve main body.
CHECK 18
Caution
Be sure to turn off the power switch before connecting or disconnecting
connectors, or parts may be damaged.
CHECK 18