49
CTC EcoZenith i360
2.
1.
4.
3.
In order to define and enable connection to the network and app, an ethernet cable
must be connected as described below.
1. Pull out the magnetic strip. It is secured with
magnets. If difficult to remove, use a small screwdriver in
the notch along the top edge.
2. Open the ferrite from the packaging, clamp around
the ethernet cable with the connector.
3. Connect the ethernet cable.
4. Route the ethernet cable through any hole in the top
cover, remove rubber grommet if necessary.
5. Connect ethernet cable to network port or router.
To permit and define connectivity, refer to the
"Communication" section in the "Installer/Define"
chapter.
7.1
Install ethernet cable
Содержание EcoZenith i350 L 1x230V
