Covidien Puritan Bennett 700 Series, Руководство по обслуживанию

Страница: 33 / 439

General information
Puritan Bennett™ 700 Series Ventilator System Service Manual 10070389 Rev. A 1-9
1.7 Manufacturer’s Declaration
The following tables contain the manufacturer’s declarations for the electromagnetic
emissions, electromagnetic immunity, recommended separation distances between ventilator
and portable and mobile RF communications equipment, and a list of compliant cables.
Warning
• Portable and mobile RF communications equipment can affect the performance of
the 700 Series Ventilator System. Install and use this device according to the
information contained in this manual.
• The 700 Series Ventilator System should not be used adjacent to or stacked with
other equipment, except as specified in this manual. If adjacent or stacked use is
necessary, the 700 Series Ventilator System should be observed to verify normal
operation in the configurations in which it will be used.
NOTE:
This is a class A product and is intended to be used in a hospital environment only. If
used outside of the hospital environment, this equipment may not offer adequate
protection to radio-frequency communication services. The user may be required to
take mitigation measures, such as relocating or re-orienting the equipment.
Other built-in service
capabilities Serial port enabling (for file transfer); loopback test for Communications option serial
ports; battery load test; calibration of oxygen sensor, oxygen regulator pressure transducer,
and PEEP pump; equalization of exhalation pressure transducer/cylinder pressure
transducer (P
e
/P
cyl
), input and viewing of calibration constants; resetting of preventive
maintenance hours; review and erasing of diagnostic code logs; review of EST test status;
and real-time display of monitored ventilator parameters.
Compliance and approvals
The 700 Series Ventilator System complies with the requirements of Directive 2007/47/EC
concerning medical devices. It therefore bears the CE marking.
IEC 60601-1
classification: 1991 Protection class I, Type B, internally powered, drip-proof equipment, continuous operation.
The 700 Series Ventilator
System complies with
these International and
European standards: IEC 60601-1/EN 60601-1
IEC 60601-2-12
IEC 60601-1-2/EN 60601-1-2
IEC 60601-1-6
The 700 Series Ventilator
System has been
certified by these test
agencies: CSA: CSA C22.2 No. 601-1, CSA C22.2 No. 601-2-12, NRTL certification.
Table 1-1: Specifications (continued)