manualshive.com logo in svg

Covidien Puritan Bennett 700 Series, Руководство по обслуживанию

Получите бесплатное руководство по обслуживанию Covidien Puritan Bennett 700 Series на {сайте}. Скачайте инструкцию для использования, обслуживания и регулировки вашего устройства. Необходимая информация, чтобы гарантировать правильную работу вашего оборудования. Теперь доступно для загрузки с нашего сайта.

Поделиться
Скачать
background image

General information

1-2

10070389 Rev. A

Puritan Bennett™ 700 Series Ventilator System Service Manual

Ventilator maintenance may involve exposure to hazardous materials, equipment, and 
conditions such as: possible electrical shock; pressurized gas; transmittable diseases; and fire, 
which could result from an oxygen-enriched environment and easily ignitable material. 
Before servicing the 700 Series Ventilator System, be aware of possible hazards and necessary 
precautions to be taken.

•

Familiarize yourself with the warnings and cautions on the ventilator labels and in 
related publications, including this manual.

 Also familiarize yourself with any warnings 

and cautions associated with the service equipment and materials being used, as well as 
those posted in the facility where the ventilator is serviced.

• Use any applicable personal protective equipment and adhere to the applicable warnings 

and cautions.

•

Be aware of the safety standards and considerations specific to your situation.

 Safety 

standards may vary with international, federal, state, and local regulatory agencies. When 
in doubt, consult material safety data sheets; environmental, health, and safety 
professionals; and regulatory affairs specialists. In addition, many facilities and institutions 
may have their own special safety considerations.

•

Be sure the ventilator passes the performance verification (Chapter 5) before it is 
returned to operation after being serviced.

 The performance verification ensures the 

product’s safety in addition to its functional integrity.

1.3  General description

The 700 Series Ventilator System (including the 740 and 760 Ventilators) provides respiratory 
support for a wide range of pediatric to adult patients for a wide variety of clinical 
conditions. The ventilator’s mixing technique allows it to ventilate critically ill patients at 
adjustable oxygen concentrations without the need for a blender, compressor, or hospital-
grade wall air.

The 700 Series Ventilator System can be mains or battery powered. Each ventilator includes 
two microcontrollers: one for breath delivery (which controls ventilation), and one for the 
user interface (which monitors ventilator and patient data). Each microcontroller verifies that 
the other is functioning properly. Using two independent microcontrollers in this fashion 
prevents a single fault from causing a simultaneous failure of controlling and monitoring 
functions.

The 700 Series Ventilator System supplies mandatory or spontaneous breaths with a piston-
based pneumatic system. Mandatory breaths can be 

volume control ventilation

 (VCV, 

available on 740 and 760 Ventilators) or 

pressure control ventilation

 (PCV, available on the 

760 Ventilator only). VCV delivers breaths to the patient at a preset tidal volume, peak flow, 
waveform, and oxygen concentration at a minimum respiratory rate. PCV delivers breaths to 
the patient at a preset inspiratory pressure, I:E ratio or inspiratory time, rise time factor (how 
quickly inspiratory pressure rises to achieve the set inspiratory pressure), and oxygen 
concentration at a minimum respiratory rate. A spontaneous breath allows the patient 
inspiratory flows of up to 300 L/min, with or without 

pressure support ventilation

 (PSV). On 

the 760 Ventilator, you can set the rise

 

time

 

factor and exhalation flow sensitivity (that is, the 

point at which the ventilator cycles from inspiration to exhalation) in PSV.

The ventilator begins 

apnea ventilation

 if no patient- or operator-initiated breath is 

delivered within the operator-selected apnea interval. Apnea ventilation is available in all 
modes (for ventilators equipped with software Rev. J or later). On the 740 Ventilator, only 
VCV breaths are available in apnea ventilation. On the 760 Ventilator, VCV or PCV breaths are 
available in apnea ventilation. 

Содержание Puritan Bennett 700 Series
























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Puritan Bennett 700 Series

Tascam CD-RW5000 Owner'S Manual preview
CD-RW5000
Бренд: Tascam Страницы: 27
Jay-Lor A50 Owner'S Manual preview
A50
Бренд: Jay-Lor Страницы: 72
MacDon TM100 Manual preview
TM100
Бренд: MacDon Страницы: 198
M-Triangel M1 Operating Instruction preview
M1
Бренд: M-Triangel Страницы: 6
Gaspardo PA2 Use And Maintenance preview
PA2
Бренд: Gaspardo Страницы: 196
RAB X34 Installation preview
X34
Бренд: RAB Страницы: 2
G-Lab DR-2 User Manual preview
DR-2
Бренд: G-Lab Страницы: 16
G&G T3X Quick Start Manual preview
T3X
Бренд: G&G Страницы: 2
NEILPRYDE RS6 Manual preview
RS6
Бренд: NEILPRYDE Страницы: 55
HANYOUNGNUX STE Series Instruction Manual preview
STE Series
Бренд: HANYOUNGNUX Страницы: 4
Park House Healthcare WARWICK User Manual preview
WARWICK
Бренд: Park House Healthcare Страницы: 6
J&M TF2 Operator'S Manual preview
TF2
Бренд: J&M Страницы: 33
Tanaka APM-7 Instruction Manual preview
APM-7
Бренд: Tanaka Страницы: 20
Tandem AutoSoft 90 Indications For Use preview
AutoSoft 90
Бренд: Tandem Страницы: 80
Tanco E100 SA Quick Reference Manual preview
E100 SA
Бренд: Tanco Страницы: 4
Martin Maxedia 4 User Manual preview
Maxedia 4
Бренд: Martin Страницы: 202
Zimmer GED5000IL Series Installation And Operating Instructions Manual preview
GED5000IL Series
Бренд: Zimmer Страницы: 52
Eaton AtLite Sure-Lites SELDWA29SD Installation Instructions preview
AtLite Sure-Lites SELDWA29SD
Бренд: Eaton Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды