Covidien Puritan Bennett 700 Series, Руководство по обслуживанию

Страница: 198 / 439

Performance verification
5-12 10070389 Rev. A Puritan Bennett™ 700 Series Ventilator System Service Manual
7. Change the ventilator setting shown in bold .
8. Make the following measurements, and verify the readings are as listed below. See
Section 5.7 15, 16, 17 .
5.6.7 Extended self-test (EST) (Test 6)
Warning
• Before running EST, you must disconnect the ventilator from the patient. Running
EST while the ventilator is connected to the patient can injure the patient.
• Do not use or override a ventilator that completes EST with a fault status without
first verifying its operational readiness by an independent means and determining
that a patient will not be placed at risk.
• Covidien urges medical departments to review the implications of using a ventilator
that completed EST with a fault status. Covidien recommends establishing a medical
department protocol that defines the conditions under which ventilator usage is
acceptable.
Control Setting
HIGH RATE 100 breaths/min
HIGH TIDAL VOLUME 1500 mL
LOW INSP PRESSURE 3 cmH
2
O
LOW TIDAL VOLUME 0 mL
HIGH PRESSURE 90 cmH
2
O
LOW MINUTE VOLUME 0 L
Mode A/C, VCV (SQUARE flow waveform for software
revision J or later)
RESPIRATORY RATE 10 breaths/min
TIDAL VOLUME 1000 mL
PEAK FLOW 80 L/m
PLATEAU 0 s
PEEP/CPAP 20 cmH
2
O
TRIGGER SENSITIVITY 20 L/min
% O
2
21 %
Measure the following Acceptable range
Tidal volume 890 to 1110 mL
Respiratory rate 9 to 11 breaths/min
PEEP 17.39 to 22.61 cmH
2
O