ControlByWeb X-320m Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 136

background image

Operation

X-320M™ User's Manual

Temperature

Display of the current temperature, current High and Low temperature values for today, and these
values for yesterday. High/Low Alarm status.

Calculated Values

This row displays the calculated values for the Heat Index, Wind Chill and Dew Point based off current
wind and temperatures.

Wind Information

Display of the current wind speed, direction, wind gust information, and High/Low Alarm status. When
the wind is 10 knots above the low for the average period, then it is considered a gust and will be
reported.

Barometric Pressure

Display of the current barometric pressure reading, pressure-trend graph for previous 24 hours, and
High/Low Alarm status.

Note: The historical information is on the state.xml page, and it loads with the graph every time.

Solar Radiation

Display of the current measurement from the Solar Radiation sensor.

Last Power Up

This displays the last time that X-320M™ was powered on. This information can be useful if the user
wants to know whether or not the unit lost power during the time since the page was last viewed.

Humidity

Display of the current humidity measurement, current High and Low humidity values for today, and
these values for yesterday. High/Low Alarm status.

Rain

Displays the rain accumulation data for the past hour, since midnight, Previous 7 days, and a total
accumulation. Total values are updated instantly. Hourly and the Total Today are updated every 4
minutes, and the previous 7 days measurements are updated daily.

Rain Counter Reset

This button resets the counters, as well as all rain totals back to zero.

Rose Diagram

Displays a graphical representation of the current and historical wind patterns (up to 1 hour). The
diagram is graduated with equally spaced radial rings representing a fraction of the Rose Diagram
History period. The default period is 30 minutes.

Note: The historical information is retained by the web browser and is lost when the browser is closed.
When the browser is opened, it will always show the current wind direction and the outermost ring will
be labeled as 1.00.

Site Information

Displays detailed information about the meteorological site.

AUX Sensors

Displays the current values measured by any auxiliary sensors.

External Link

Displays a link provided by the user to an external site or webpage. Configurable in the

Status Setup

Page 88

Xytronix Research & Design, Inc.

«
...
86
87
88
89
90
...
»

Содержание X-320m









































































































































Отзывы:

Нет отзывов

Похожие инструкции для X-320m

Бренд: La Crosse Technology Страницы: 27

Бренд: Fine Offset Electronics Страницы: 58

iPod Cradle Kit

Бренд: Directed Electronics Страницы: 8

WS-9740U-IT-NRC

Бренд: La Crosse Technology Страницы: 17

Redfly mobile dock

Бренд: Celio Страницы: 33

Бренд: Ambient Weather Страницы: 7

SpeechMike ACC4000

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 22

STREAMIUM WAC7500

Бренд: Philips Страницы: 69

SJM3140 - Digital Player Docking Station

Бренд: Philips Страницы: 101

Vantage VUE Sensor Suite

Бренд: Davis Instruments Страницы: 24

Dynadock USB Docking Station

Бренд: Toshiba Страницы: 2

Бренд: Toshiba Страницы: 3

Бренд: Toshiba Страницы: 4

Dynadock Dynadock Universal USB Docking Station

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 32

dynadock PA3541

Бренд: Toshiba Страницы: 51

Бренд: Toshiba Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды