X-320M™ User's Manual
Installation and Setup
spikes that may induce noise on the sensor signals. Similarly, avoid running sensor cables near any
radio transmission antennas or coaxial feed-lines.
Protect any electrical connections with appropriate weather shielding.
Due to the broad range of applications and environments where X-320M™ may be employed,
installation success on long sensor runs may vary significantly.
2.2.6 Network Connection
Connect the Ethernet port to a 10 Base-T or 10/100 Base-T Ethernet connection. This typically connects
to an Ethernet hub, switch, or router. For configuration, X-320M™ may be connected directly to the
Ethernet port on a computer using a “crossover” cable. Otherwise, for connection through a hub or
router, a standard “straight-through” cable should be used.
X-320M™ can be used on a wireless network by connecting through an Ethernet bridge or a wireless
router.
Note: The wireless Ethernet bridge or router must be properly configured for the wireless network. Refer
to the installation instructions for the wireless device.
Xytronix Research & Design, Inc.
Page 25
Figure 2.2k - Network Connection
Figure 2.2l - Wireless Connection
Содержание X-320m
Страница 1: ......
