X-320M™ User's Manual
Installation and Setup
Email Option
Simple email messages can be sent in response to alarm conditions. This parameter is used to
specify what alarm conditions, if any, will cause email messages to be sent. Email notification will
work only if email is correctly set up in the
Network
setup page.
-
No Email Messages
:
No email messages will be sent due to alarm conditions.
-
Send Email on High Alarm
: Email notifications will be sent due to the High Alarm condition.
-
Send Email on Low Alarm
:
Email notifications will be sent due to the Low Alarm condition.
-
Send Email on High and Low Alarm
:
Email notifications will be sent due to the High and/or
Low Alarm condition.
-
Send Email on High, Low, and Normal
:
Email notifications will be sent due to the High
Alarm, Low Alarm, or when Normal conditions are regained.
Use Email Address
If email messages are to be sent based on alarm conditions, these check boxes specify to which
email addresses the message will be sent. Email address specified on the
Network
setup tab will be
shown next to each check box.
Output 1 or Output 2 (only shown if one of the Digital I/O's is selected as an output on the I/O
setup Tab.)
This field is used to set the action that the corresponding Output will have due to an alarm condition.
The first drop-down box specifies the action. The following Actions are available:
-
No Action:
No action is taken by the output.
-
Turn On:
Turns the output On due to an alarm condition. The output will turn Off when
alarm conditions are no longer met.
The second drop-down box specifies the conditions that will cause the action previously specified.
The following conditions are available:
-
High Alarm:
The specified output action occurs due to the High Alarm.
-
Low Alarm
:
The specified output action occurs due to the Low Alarm.
-
High or Low Alarm:
The specified output action occurs due to the High and/or Low Alarm.
Remote Relay 1-2
The X-320M™ can be configured to control relays in other ControlByWeb™ products that are
located at a remote locations on the network. This field determines the action taken by Remote
Relay due to an alarm condition. The following actions are available:
-
No Action:
No action is taken by the relay.
-
Turn On:
Turns the relay On due to an alarm condition. The relay will turn Off when alarm
conditions are no longer met.
The second drop-down box specifies the conditions that will cause the action previously specified.
The following conditions are available:
-
High Alarm:
The specified relay action occurs due to the High Alarm.
-
Low Alarm:
The specified relay action occurs due to the Low Alarm.
-
High or Low Alarm:
The specified relay action occurs due to the High and/or Low Alarm.
Xytronix Research & Design, Inc.
Page 59
Содержание X-320m
Страница 1: ......
