X-320M™ User's Manual
Installation and Setup
Email Option
Simple email messages can be sent in response to alarm conditions. This parameter is used to
specify what alarm conditions, if any, will cause email messages to be sent. Note that email
notification will work only if email is correctly set up in the
Network
setup page.
-
No Email Messages
: No email messages will be sent due to alarm conditions.
-
Send Email on High Alarm:
Email notifications will be sent due to the High Alarm
condition.
-
Send Email on Low Alarm
: Email notifications will be sent due to the Low Alarm condition.
-
Send Email on High Alarm and Low Alarm
: Email notifications will be sent due to the High
and/or Low Alarm condition.
-
Send Email on a High Alarm, Low Alarm, and Normal
: Email notifications will be sent due
to a High Alarm, Low Alarm, or when Normal conditions are regained.
Use Email Address
If email messages are to be sent out based on alarm conditions, these check boxes specify to which
email addresses the message will be sent. Email addresses specified on the
Network
setup tab will
be shown next to each check box.
Output 1 or Output 2 (This option will only appear if one of the Digital I/O's is selected as an
output on the I/O tab)
This field is used to set the action that the corresponding Output will have due to an alarm condition.
The first drop down box specifies the action. The following actions are available:
-
No Action:
No action is taken by the output.
-
Turn On:
Turns the output On due to an alarm condition. The output will turn Off when
alarm conditions are no longer met.
The second drop-down box specifies the conditions that will cause the action previously specified.
The following conditions are available:
-
High Alarm:
The specified output action occurs due to the High Alarm.
-
Low Alarm:
The specified output action occurs due to the Low Alarm.
-
High or Low Alarm:
The specified output action occurs due to the High and/or Low Alarm.
Xytronix Research & Design, Inc.
Page 69
Содержание X-320m
Страница 1: ......
