Operation
X-320M™ User's Manual
Email 1
Email 2
Email 3
Email 4
Email 5
Note: X-320M™ must be power-cycled (power disconnected, then reconnected) before network settings
take effect. Only the settings on the
Network
tab require power-cycling before taking effect.
The email options and recipients for each monitored value can be configured separately. Select the
Email Option and checkbox for the desired email recipient for each measured value.
Once the email settings are entered, the email functionality can be tested by entering the following
command:
http://IP address/state.xml?testEmail=1
For example, using the default IP address, enter:
http://192.168.1.2/state.xml?testEmail=1
This will cause an email message to be sent immediately. If the messages don't get through, the system
log file may have some clues to assist in diagnosing the problem (http://192.168.1.2/syslog.txt). See
Appendix E: Log Files
for additional Logging Information.
Page 102
Xytronix Research & Design, Inc.
Содержание X-320m
Страница 1: ......
