Installation and Setup
X-320M™ User's Manual
Relay #
The remote device may have multiple relays. This field is used to identify the specific relay to be
controlled on the remote device. If the remote device is a single WebRelay™, this field should be
zero. If the remote device has multiple relays, this field should be set to the relay number. For
example, if relay 2 is to be controlled on another ControlByWeb™ product, the Relay # would be set
to
2
. This field can be set from
0
to
255
.
Periodic State Interval
When X-320M™ is configured to control a remote device, or receive analog information from a
remote device, a connection is established. If the device does not receive a message for 50 seconds
the connection is terminated. In order for the connection to be maintained, a message containing the
state of the relay can be sent at a periodic interval. This field sets the time interval at which the
message is sent. The default setting is
50
seconds, thus just maintaining the connection. If the
connections should not be maintained, enter a value of
0
. This field may be set to
0
or
5-50
seconds.
Page 50
Xytronix Research & Design, Inc.
Содержание X-320m
Страница 1: ......
