Appendix I: SNMP Requests, Objects and Community Strings
X-320M™ User's Manual
Appendix I: SNMP Requests, Objects and Community Strings
Sensor readings measured by the X-320™, and some simple network parameters can be retrieved
using Simple Network Management Protocol(SNMP). For most cases, using SNMP is as simple as
locating the appropriate Management Information Bases (MIB) files and loading them into the SNMP
manager software. X-320M™ can make use of the following MIB files: RFC1213-MIB and
XYTRONIX.mib.
Note: As additional ControlByWeb products are introduced, the Xytronix MIB file will remain reverse
compatible, older MIB files can be overwritten.
SNMP is configured under the
Advanced Network
setup tab. See section
2.4.3 Advanced Network
Tab
for more information.
X-320M™ supports the following Packet Data Units (PDU):
-
GetRequest
-
GetNextRequest
-
Trap
Standard Objects
X-320M™ supports several standard RFC1213 objects that usually come with SNMP management
software. If not, an Internet search for RFC1213-MIB will turn up multiple links.
RFC1213 Object
Response
system.sysDescr
X-320M DAQ Module
system.sysObjectID
X320M
system.sysUpTime
Time in hundredths of seconds since X-320M™ was
last powered.
system.sysName
X-320M*
*The sysName is customizable under the
Control Page Setup
tab.
Xytronix Objects
X-320M™ also supports some special objects that can be found in the XYTRONIX.mib. This MIB can be
downloaded from our website.
Page 128
Xytronix Research & Design, Inc.
Содержание X-320m
Страница 1: ......
