ControlByWeb X-320m, Руководство пользователя

Страница: 30 / 136

Installation and Setup X-320M™ User's Manual
4.
In the Local Area Connection Properties window in
the Connection Uses box, scroll down and
highlight “Internet Protocol (TCP/IPv4).” Click the
button labeled Properties. The Internet Protocol
(TCP/IPv4) Properties menu appears (Figure
2.3e).
Note: If “Use the following IP address” is already
selected, the computer has been set up with a
static IP address. Record these values so that the
IP address of the computer can be restored once
the IP address of X-320M™ has been
successfully changed.
5.
Select the radio button labeled "Use the following
IP address" and type in the IP address:
192.168.1.50
6.
Type in the subnet mask:
255.255.255.0
No need to change the default gateway field. Click
OK to accept the new settings.
7.
Open the setup pages as described in section 2.4.
If the setup pages are not accessible, verify that X-320M™ is powered on and that the LINK light is
illuminated. Check all network connections and settings.
Another way to check communications is to ping X-320M™ from the command prompt by typing
ping
X-320M IP address
.
Page 30 Xytronix Research & Design, Inc.
Figure 2.3e- TCP/IP Properties