X-320M™ User's Manual
Installation and Setup
2.4.12 Wind Direction Tab
This page provides configuration options for configuring the Wind Direction sensor input. Additional
information about the Wind Direction calculations can be found in
Appendix F: Methods and
Calculation Details
.
Sensor Connection
This drop down menu allows you to select which type of input you are using to monitor wind speed.
The following typical sensor connections are available:
-
None:
This is used if no sensor is connected to monitor wind directions.
-
Rate 1-2
:
This option is used if the connected sensor outputs a pulse based on the wind
direction.
Note: Input 1 or 2 must be configured as a counter when using rate.
-
Analog 1-4:
This option is used if the connected sensor outputs an analog value that varies
based on wind direction.
-
Frequency Input:
This option is used if the connected sensor outputs a frequency based on
the wind direction.
-
Rmt Analog 1-4:
This option is used if the connected sensor being used is an analog
sensor that is being read from a remote Analog device, such as another X-320™ or Analog
Module.
Xytronix Research & Design, Inc.
Page 61
Figure 2.4n - Wind Direction Tab
Содержание X-320m
Страница 1: ......
