Installation and Setup
X-320M™ User's Manual
Section 2: Installation and Setup
Installation consists of mounting X-320M™, connecting it to an Ethernet network, providing power,
configuring via a web browser, and wiring the Digital I/O's, Analog Inputs, Frequency Inputs, and
Temperature and/or Humidity Sensors.
2.1 Mounting
X-320M™ can be wall mounted or mounted to a standard (35mm by 7.55mm) DIN-Rail. It should be
mounted in a clean, dry location where it is protected from the elements. Ventilation is recommend for
installations where ambient air temperatures are expected to be high.
See
Appendix H: Mechanical Information
for additional mechanical details.
2.1.1 Wall Mounting
Mount X-320M™ to a wall using two #8 screws. Attach the screws to the wall vertically spaced exactly
2.5 inches apart. The head of the screw should be about 1/10 inch away from the wall.
2.1.2 DIN-Rail Mounting
Attach X-320M™ to the DIN-Rail by hooking the top hook on the back of the enclosure to the DIN-Rail
and then snap the bottom hook into place. To remove X-320M™ from the DIN-Rail, use a flat-head
screwdriver. Insert a flathead screwdriver into the notch in the release tab and pry against the enclosure
to release the bottom hook.
Page 14
Xytronix Research & Design, Inc.
Содержание X-320m
Страница 1: ......
