Club Car Pioneer 1200, Руководство по техническому обслуживанию

Страница: 300 / 360

UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK Unitized Transaxle Disassembly
Page 16-18 2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual
16
Unitized Transaxle Disassembly, Continued:
16. Remove the shifter shaft and oil seal from the case (Figure 16-45, Page 16-18).
16.1. Use snap ring pliers (.047 tip) to remove the retaining ring (16) on the shifter shaft (Figure 16-40,
Page 16-16).
16.2. Remove flat washer (17) from the shifter shaft on the outside of the case as shown, then remove
the shifter shaft by pushing it through the case toward the interior of transaxle (Figure 16-40,
Page 16-16).
16.3. Use a seal puller to remove the shifter shaft oil seal (18) from the case (Figure 16-40, Page 16-16).
17. Remove the breather (32) from the case (Figure 16-40, Page 16-16).
18. Remove the governor assembly from the case.
18.1. Remove the cotter pin (21) and flat washer (22) from the pivot arm (25) (Figure 16-40, Page 16-16).
Figure 16-43 Remove Intermediate Gear Figure 16-44 Input Shaft Oil Seal
Figure 16-45 Oil Flow Guide Figure 16-46 Pivot Arm Oil Seal
Remove synchronizer gear assembly
and shifter fork together as a unit.
INTERMEDIATE
GEAR ASSEMBLY
IDLER SHAFT
ASSEMBLY
SLOT
OIL FLOW GUIDE
SHIFTER SHAFT
TAB