Club Car Pioneer 1200, Руководство по техническому обслуживанию

Страница: 187 / 360

ELECTRICAL COMPONENTS Ignition Coil
2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual Page 12-25
12
RPM Limiter Installation
1. Place the RPM limiter damper on the front of the RPM limiter mounting bracket (Figure 12-24, Page
12-25).
2. Place the RPM limiter on the damper squarely so that RPM limiter fits tightly against the damper.
3. Place the band over the RPM limiter and align the holes. Place the brown wire ring connector onto the
flange head bolt and secure the left side of the band. Use another flange head bolt to secure the other
side of the band. Make sure the band holds the RPM limiter securely in place. Tighten fasteners to 7 ft-
lb (9.5 N·m).
4. Reconnect black wire at the bullet connector to the white/black wire.
5. Connect battery cables, positive cable first and tighten the terminals to 20 ft-lb (27.1 N·m). Coat termi-
nals with Battery Protector Spray (CCI 1014305).
6. Release the prop rod and lower the bed.
IGNITION COIL
Read DANGER and WARNING on page 12-1.
Testing the Ignition Coil
See Section 11, Test Procedure 14, Page 11-33, and Test Procedure 15, Page 11-34.
Ignition Coil Removal
1. Access the engine compartment. See DANGER on page 12-1.
1.1. Tilt the bed and ensure that the prop rod is engaged.
2. Disconnect the battery cables, negative cable (–) first (Figure 12-1, Page 12-2).
3. Unplug spark plug wire from the spark plug.
Figure 12-24 RPM Limiter Assembly
FEMALE BULLET
TERMINAL
BLACK WIRE
BROWN WIRE
RPM LIMITER
FEMALE BULLET
TERMINAL
BLACK WIRE
TO IGNITION COIL
WHITE/BLACK
KILL CIRCUIT WIRE
DAMPER