Club Car Pioneer 1200, Руководство по техническому обслуживанию

Страница: 276 / 360

FUEL SYSTEM Fuel Tank
Page 14-26 2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual
14
3. Return the seat support (1) to its original position by rotating it 90° counterclockwise (Figure 14-18,
Page 14-24) and install the seat support and armrests. Tighten bolts (8) to 13 ft-lb (17.6 N·m)
See Figure 4-2, Section 4, Page 4-7.
4. Connect the vent tube (6) to the gas tank vent (Figure 14-15, Page 14-20).
5. Connect the fuel line (1) to the fuel tank shut-off valve (15). Use a new clamp (Figure 14-15, Page 14-20).
6. Connect the black wire from the fuel gauge to one of the fuel level sending unit screws. Connect the
orange wire to the center stud (Figure 14-19, Page 14-26) and install the flat washer, lock washer and
nut. Tighten to 18 in-lb (2.0 N·m).
7. Slide the rubber boot over the stud (Figure 14-19, Page 14-26).
Figure 14-19 Fuel Level Sending Unit
Figure 14-20 Fuel Tank
TANK
CONNECTION
BLACK
WIRE
ORANGE
WIRE
FRAME
CONNECTION
TO CARBURETOR
VENT TUBE
VENT
GAS
TANK
FUEL
SHUT-OFF
VALVE