Club Car Pioneer 1200, Руководство по техническому обслуживанию

Страница: 230 / 360

FE350 ENGINE Oil Pump
Page 13-32 2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual
13
Ignition Coil and Flywheel Removal, Continued:
∆ CAUTION
• The flywheel nut has right-hand threads. Turn it clockwise to tighten, or counterclockwise to loosen.
• Do not damage the fan blades with the strap wrench. Do not place screwdriver or pry bar in the fan
blades.
4. Remove the flywheel with a puller.
5. Remove the flywheel key from its groove.
Flywheel Installation
See Engine Assembly on page 13-48.
Ignition Coil Inspection and Repair
See Test Procedure 16, Section 11, Page 11-35.
Ignition Coil Installation
1. Installation is the reverse of removal.
2. While tightening the two bolts (3), use a bronze feeler gauge to adjust the ignition coil air gap to 0.012
in. (0.304 mm) (Figure 13-64, Page 13-32).
3. Tighten the two ignition coil bolts to 30 in-lb (3.4 N·m).
OIL PUMP
Read DANGER and WARNING on page 13-1.
Oil Pump Cover Removal
1. Remove the six screws (1 - 6) and remove the oil pump cover (7) (Figure 13-65, Page 13-33).
2. Peel off the oil pump cover gasket (8).
3. Remove the pump gear cover plate (9) and filter screen (10).
Figure 13-63 Flywheel Nut Removal Figure 13-64 Adjust Ignition Coil Air Gap
5
7
4
M
F
34
81
0.012"
(0.304 mm)
3