Club Car CARRYALL 1 2000, Руководство по техническому обслуживанию и ремонту

Страница: 40 / 136

BODY AND TRIM Front Body
Page 4-4 2000 Turf/Carryall Vehicle Maintenance and Service Manual
4
3. Remove carriage bolts (15), locknuts (17) and washers (16) from front body trim. Remove screws (14)
from top of front body (Figure 4-1, Page 4-4).
4. Loosen (do not remove) screws (18) holding front body trim against front body (Figure 4-1, Page 4-4).
5. For vehicles equipped with headlights:
5.1. Disconnect the light wiring harness from the headlight assemblies.
6. Pull front body (12) from under trim (13) and remove from vehicle (Figure 4-1, Page 4-4).
FRONT BODY INSTALLATION
1. Install front body (12) under trim (13), align holes and finger tighten screws (14) holding front body
against frame (Figure 4-1, Page 4-4) .
2. Install carriage bolts (15), washers (16) and locknuts (17) onto front body trim. Tighten bolts to 11 ft-lb
(14.9 N·m). Tighten screws (14) to 20 in-lb (2.3 N·m) (Figure 4-1, Page 4-4).
Figure 4-1 Front Body Assembly
Club
Car
TURF 2, 6, CARRYALL 2,
2 PLUS AND 6
TYPICAL 2
PLACES
TURF2, 6, CARRYALL 2,
2 PLUS AND 6
TURF 1 AND
CARRYALL 1
ONLY
TYPICAL 2
PLACES
TYPICAL 6
PLACES
TYPICAL 2
PLACES
TYPICAL 2
PLACES
1
13
14
11
12
6
17
16
15
18
19
TYPICAL 2
PLACES
5
3
4
2
3
9
8
10
9
8